10 Stk. pcs. NE555P 5-15V DIP8

10 Stk. pcs. NE555P 5-15V Precision Timer Microsekunde bis Stunden DIP8 IC

10 pcs. NE555P Precision Timer DIP8 IC © androegg

our professional IC Shipment method © androegg

Versandhinweis

Unser Versand erfolgt

•  SCHNELL, als Briefsendung (nicht als Warensendung)

• ESD geschützt, eingeschweißt in ESD Folie

• geschützte Pins, durch Schaumstoff Polsterung

• im Versandkarton, nicht lose im Luftpolsterkuvert

10 pcs. NE555P Precision Timer DIP8 IC.

Shipping Informations

Our shipment is

•  FAST, registered mail(not Economy Shipping)

• ESD protected, shrink wrapped in ESD Foil

• PROTECTED Pins, foam cushioning

• SAVE in cardboard box, not unprotected in a air cushion enveleope

Precision Timer DIP8 IC Features:

These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two- thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip- flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs.

• Working Voltage from 5-15V
• Timing From Microseconds to Hours
• Astable or Monostable Operation
• Adjustable Duty Cycle
• TTL-Compatible Output Can Sink or Source Up to 200 mA